The Sig Sauer Difference
The Sig Sauer 516 Patrol Rifle is not intended necessarily for military or law enforcement use, but can be if the inside is changed.; it’s a semi-auto, yet it is extremely accurate; and it will dust coyotes. The 516 is not just another AR. It has some really cool improvements over the typical AR-style rifle. One of the most notable improvements is it’s gas piston operated. Conventional AR rifles channel gas down a tube to the bolt—specifically to the carrier shoe, which is attached to the bolt carrier. This is where the gas stops, expending its energy to the spring-loaded carrier pushing it backward into the stock. This, along with the blowback action of the cartridge, extracts the spent case.
This system has and still performs extremely well, but the gasses transferred to the bolt area carry dirt and fouling along with it, which can be left on the bolt carrier. This fouling needs to be removed during routine maintenance in order to ensure continued smooth operation. The gas piston system, however, and this has been around for years, keeps the gas up front on the gas block part of the rifle. The energy is then transferred to the bolt carrier via a solid rod that runs along the same path the gas tube ran. This keeps the fouling in the gas piston chamber, which means it doesn’t have to be cleaned as often. It still needs maintenance periodically though. I have shot about 600 rounds through the 516, and there is not a speck of fouling around the bolt or carrier area.
The rifle comes with MagPul’s adjustable stock and pistol grip, which is a nice addition to an AR. The adjustability makes it fit a variety of different sized shooters and makes storing the firearm when not in use a little easier. It also comes with a four-rail forearm for attaching a white light or whatever tool for the purpose intended. The carbine barrel is topped off with a flash hider.
The rifle has a more robust lower than your granddaddy’s AR with heavy squared off lines like the area that houses the front pivot detent spring and area around the bolt release/lock. Also there is a left side magazine release making this function ambidextrous. Inside the frame is thicker with quite a bit more metal on the sides and back area for improved durability.
Have you ever been aggravated with your AR when the upper and lower start to wear a little making for a less than tight fit? Companies have come up with expandable pins for the rear upper as well as the little red rubber Accu Wedge, which all help in this area. Sig had a better idea: they put a spring-loaded adjustable detent in the lower right under the rear locking pin tab that keeps constant spring tension on the upper. As the unit wears, it can be adjusted to keep the tension as it should. The end result is no more rattling upper and lowers.
Shooting the Sig 516
The rifle comes with flip-up adjustable iron sights, but Sig’s semi-mini red dot sight—a nice light sight for fast action shooting—can also be had. I topped this one with a Leupold Mark 4 MRT scope, a 1.5×5 illuminated reticle scope that can be used in close quarters, as well as handle long shots all in one sight. I was planning to use the gun for 3-Gun competition and the MRT helps with those close and long-range rifle shots in the same stage. Guess what? It will be a light and quick handling rifle for dusting coyotes in the fall and winter, too.
I’ve been shooting the full floated carbine at longer range targets and found it to be accurate out to 400 yards. Shooting at an 8- and 10-inch gong, one homemade and one of MGM Target’s flash gongs, if I do my job, the rifle does its. I have used several different types of ammo in the rifle, and it seems to digest it all well. I started out with Federal 55-grain FMJ, shot some Silver Bear 62-grain HPBT and had great luck with American Eagle 62-grain FMJ. It seemed to like the heavier bullet. I kind of do, too.
The rifle is quick to work around obstacles like barricades and windows making it a nice 3-Gun choice, and of course it would make a great close combat or home defense weapon. The shorter carbine barrel is better for retention during searches and working barricade stages and still accurate enough for the long shots.
This article appeared in the March 11, 2013 issue of Gun Digest the Magazine.
Recommended: Check out Gunsmithing The AR-15
You’ll Love This Book If:
- You own an AR-15 and want to learn how to fix or upgrade it yourself
- You’re a professional gunsmith or are studying to become one
- You want to maintain your AR-15 for years of rugged, dependable use