Editor’s Note: In Part I of this series we look at the history and concept of the Leatherwood Hi-Lux M1000 ART Scope. In Part II, we’ll discuss setting up and sighting in this unique optic. And in Part III we’ll head out to the big range to see how well it ranges and compensates for shots out to 600 yards.
“A child of five would understand this. Send someone to fetch a child of five,” said Groucho Marx, in one of his classic spoofs. My first experience with a long-range tactical scope was a lot like that — like something out of a Marx Brothers routine. I was completely out of my element when it came to using the thing.
The ultra-fine turret adjustments were better suited for benchrest competition than real-world tactical or hunting applications. The ¼ MOA turrets made field shooting a complex and time-consuming affair. It involved math — lots of math.
After the second revolution of the turret and counting what seemed like hundreds of clicks, mere mortal men like me begin to lose count and get lost. Try doing that — while maintaining all the Mil Dot calculations in your head — while under stress. And hope the damn target doesn’t move.
2nd Lieutenant James Leatherwood (U.S. Army) understood this problem. Before he entered the Vietnam War, he had been working on a scope called the ART (Automatic Ranging and Trajectory) in the ‘60s to simplify and bring together range finding and bullet drop compensation. It came just in time, as the U.S. military found itself losing servicemen to Viet Cong snipers who had the home field advantage in terrain that was, to say the least, difficult.
Under stressful conditions like those, it needed to be simpler, faster.
The result was the ART — and later the ARTII — scopes developed by Leatherwood, which solved the bullet drop and ranging problem for the military. The scope was installed on M14/M21s, and U.S. snipers began to gain advantage on the battlefield. They were unorthodox and they were deadly.
It works by combining a variable power zoom ring locked to a caliber-specific cam and hinged base. In addition to a standard Mil Dot reticle, there is a rectangular bracket representing 1 meter (with 18-inch or ½-meter subtends) surrounding the crosshair. The power ring and adjustable cam are synced to the scope base — which raises and lowers compensating for bullet drop. You can fine-tune the cam based on changes in elevation or temperature.
It sounds complicated; but it takes all the computations necessary for range acquisition and bullet drop compensation off the shooter’s plate and does them automatically. It’s a load off the shoulders. And best of all, your eye never has to leave the scope: You can literally engage any number of targets from close up to 1000 yards (1200 yards with the M-1200 version) with a simple turn of the knob.
Using the power ring you “frame” an object of known measurement (say an 18-inch deep chest of a deer) in the bracket found in the scope’s reticle. The scope base adjusts appropriately. Aim. And shoot. You don’t really need to know what range the target is; all the computations are internal.
However, the one exception to that is for wind compensation or shooting at angles. For these more advanced requirements, after you’ve bracketed the target, the range is spelled out on the near side of the zoom ring. Once you know that, you can either use the turret to make an MOA-based wind adjustment, or — since you hold crosshairs dead-on with this system, a distinct advantage — you hold over right or left using a Mil holdover.
Interestingly, these auto-ranging scopes were so effective in Vietnam, they are the only optic from that era still in active duty today. In fact, the U.S. Army’s FM 23-10 Sniper Training Manual still covers operation and maintenance of the scope. Today, a firm called Iron Sight, Inc. builds and repairs the military ARTII.
The ART M-1000 is a civilian version of the concept, produced by Leatherwood Hi-Lux, under the direction of Leatherwood’s son Corbett Leatherwood. It is nearly identical to the military version save for the fact that it sits slightly higher than the military ARTII. Other differences include the cam being adjustable for cartridges ranging from the 17 Remington to the .50 BMG. Its turrets are unique, too, with the ability to save five different zeroes for a multitude of rounds (target and hunting ammo, for example). It’s also considerably more affordable, with an MSRP of less than $500 (used ARTIIs are fetching $1000-1500).
The M-1000 optic is 2.5-10 X 44 mm, while the M-1200 is a 6-24 X 50 mm scope. Both have 1-inch tubes.
After handling this scope, first at SHOT Show 2012, and now here at the Gun Digest offices, I’m quite impressed with the quality and construction given the price point. While the first generation reportedly had a rocky start, these newer generation scopes have gotten better and now enjoy a very good reputation.
For one thing, it is entirely mechanical (as opposed to relying on electronics) — and can be calibrated for just about any cartridge. You get a lot of bang for your buck.
With an interesting military history, and track record of success in the field, plus ease-of-use for today’s recreational long-range shooters, the ART might be the most interesting scope I’d never heard of.
It’s easy to envision it fulfilling a role as a designated marksmen rifle optic, or for Western big game hunters. Leatherwood sees it as an ideal way to give new folks instant success and confidence in the long-range shooting game, as the video below demonstrates.
Personally, I can’t wait to get out to the range and put the ART-1000 through its paces. So stay tuned.
Need more basic riflescope information? I recommend you read my primer on choosing a rifle scope.
Want to get your hands on an ART-1000 scope? Click here to buy at GunDigestStore.com!
Your price: $391.00
You save: $68.00 (15%)
All the shooter has to do is place the reticle on the target, zoom in to FRAME an area of known size (i.e. the 18_ height of a buck’s chest cavity), AIM, and squeeze the trigger to SHOOT. It all takes less than 5 seconds, and the shooter’s eye never leaves the scope! When the shooter frames an 18_ or 1 meter target using the brackets on the reticle, the scope will automatically range the target and compensate for bullet trajectory for distances of 250 to 1,000 meters. Buy Now
About the Author: Corey Graff is the online editor for gundigest.com. His personal interest in firearms includes handguns for hunting and self-defense as well as guns from the World War II era.
Leave a Reply
You must be logged in to post a comment.